Publicité
Les langues disponibles
Les langues disponibles
4 Getting Started
• The following items are enclosed in the packaging box:
DR400
Power Adapter
User Manual
• Get the network ready
-
For wireless WLAN network connection:
Check if the WLAN LINK/ACT light of the wireless access point
or router is illuminated. Consult the user guide for any questions.
• Connect the power adapter to the back of the DR400 and plug it into
the power socket. Switch it on at the back of the DR400.
• When you start the device for the first time, the system will ask you to
configure the Language and Network.
See 5.3.2 for detailed network configurations.
You may setup the network connection immediately, but you can
also do the setup later.
• Press Standby to enter standby mode. The time, date and any active
Publicité
