Publicité
Les langues disponibles
Les langues disponibles
Datalogger/English
LEDs
Indication
Both LED lights OFF
REC
ALM
Logging not active
Or Low Battery
One green flash every 10 sec. *
REC
ALM
Logging, no alarm condition**
Green double flash every 10 sec. *
Delayed start
Red single flash every 10 sec. *
-Logging, low alarm for RH***
REC
ALM
Red double flash every 10 sec. *
-Logging, high alarm for RH***
Red single flash every 60 sec.
- Low Battery****
Yellow single flash every 10 sec. *
-Logging, low alarm for TEMP***
REC
ALM
Yellow double flash every 10 sec. *
-Logging, high alarm for TEMP***
Yellow single flash every 60 sec.
- Logger memory full
* To save power, the logger's LED flashing-cycle can be changed to 20s or 30s via the
supplied software.
** To save power, alarm LEDs for temperature and humidity can be disabled via the
supplied software.
*** When both temperature and relative humidity readings exceed alarm level
synchronously, LED status indication alternate every cycle. For example: If there is only
one alarm, the REC LED blinks for one cycle and alarm LED will blink for next cycle. If
there are two alarms, REC LED will not blink. First alarm will blink for first cycle and the
next alarm will blink for next cycle.
**** When the battery is low, all operations are disabled automatically.
2
All manuals and user guides at all-guides.com
NOTE: Logging automatically stops when the battery weakens (logged data is retained).
Action
The supplied software is required to restart logging and to download logged data.
***** To use the delay function. Run the datalogger Graph software, click the computer
Start logging
icon on the menu bar (second from left) or select LOGGER SET from the LINK pull-down
menu. The Setup window appears, and you see two options: Manual and Instant. If
Replace battery and
you select the Manual option, after you click the Setup button, the logger will not start
download the data
logging immediately until you press the yellow button in logger's housing.
To start, hold the start
SPECIFICATIONS
button until Green and
Yellow LED flash
If logging, it will stop
automatically. No data
will be lost. Replace
battery and download
data
Download data
02/12/2017 Version No. 001
02/12/2017 Version No. 001
Overall Range: 0 to 100%
Accuracy: 0 to 20, 80 to 100%
Relative
Humidity
Accuracy: 20 to 40, 60 to 80%
Accuracy: 40 to 60%
o
Overall Range: -40 to 70
C, -40 to 158
Accuracy: -40 to -10, 40 to 70
o
Temperature
Accuracy: -10 to 40
C
o
Accuracy: -40 to 14
C, 104 to 158
o
o
Accuracy: 14
C to 104
F
o
Overall Range: -40 to 70
C, -40 to 158
Dew point
Temperature
o
Accuracy: 25
C, 40 to 100%RH
Logging rate
Selectable sampling interval: From 2 seconds up to 24 hours
Operating
o
o
-35 to 80
C (-31 to 176
F)
temperature
3.6V lithium(1/2AA)(SAFT LS14250,Tadiran TL-5101 or
Battery type
equivalent)
1 year (typ.) depending on logging rate, ambient temperature &
Battery life
use of alarm LEDs
Dimensions
101 x 25 x 23 mm (4x1x.9")
Weight
172g (6oz)
Datalogger/English
RS-170 RS-171
±5.0%
*
±3.5%
±3.0%
o
F
o
o
C
±2
C
o
±1
C
*
*
o
o
F
±3.6
F
o
±1.8
F
o
F
*
o
-40 to 70
C
o
-40 to 158
F
*
*
*
*
*
*
*
*
*
*
*
*
3
Publicité
