Toro Flex-Force Power System 51825T Manuel De L'utilisateur page 11

Removing the Blower Tube
Press down on the tab latch to separate the blower
tube from the blower (Figure
1. Tube latch
Removing the Battery from
the Blower
Press the battery latch to release the battery pack and
slide the battery pack out of the blower
1. Battery latch
7).
Figure 7
(Figure
Figure 8
Storage
Important:
charger only in temperatures that are within the
appropriate range; refer to
Important:
the off-season, remove the battery pack from the
tool and charge the battery pack until 2 or 3 LED
indicators turn green on the battery. Do not store
a fully charged or fully depleted battery. When you
are ready to use the tool again, charge the battery
g273159
pack until the left indicator light turns green on
the charger or all 4 LED indicators turn green on
the battery.
•
Disconnect the product from the power supply
(i.e., remove the plug from the power supply or the
battery pack) and check for damage after use.
•
Do not store the tool with the battery pack installed.
•
Clean all foreign material from the product.
•
When not in use, store the tool, battery pack, and
8).
battery charger out of the reach of children.
•
Keep the tool, battery pack, and battery charger
away from corrosive agents, such as garden
chemicals and de-icing salts.
•
To reduce the risk of serious personal injury, do
not store the battery pack outside or in vehicles.
•
Store the tool, battery pack, and battery charger
in an enclosed clean, dry area.
g267488
9
Store the tool, battery pack, and
Specifications (page
If you are storing the battery pack for
7).