Operation; Switch On / Switch Off; Regulation Of The Vacuum And Display; Cycle Regulation And Display - Ardo CARUM Mode D'emploi

Masquer les pouces Voir aussi pour CARUM:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4.3. Operation

Vacuum and cycles can be adjusted independently of each other. Select
the adjustment which is the most comfortable for you.
a
Stand-by button
b
Adjust the vacuum
c
Vacuum information
d
Backlight button
e
Backlight information
f
Time display
g
Time symbol
h
Time button
i
Cycle information
j
Adjust the cycle
k
Mode button
l
Mode information / Expression
m
Mode information / Stimulation

4.3.1. Switch on / switch off

Switch on the unit by pressing the stand-by button once.
A welcome page will be displayed.
When it is switched on, the breastpump is in stimulation mode (orange
display). Medium vacuum and cycle level. To turn the unit off, press the
stand-by button once again.
The Stand-by function is the same for battery operation, electrical outlet
power supply or 12 volts DC power supply (car battery operation).
Display mode:
The operation mode is shown on the illuminated LCD display. The display
turns off when the unit is switched off.

4.3.2. Regulation of the vacuum and display

The vacuum (suction strength) can be adjusted, one level at a time, by
repeatedly pressing, or by holding down the vacuum button
(to the left side of the key pad). The vacuum strength can be individually
regulated in both stimulation mode and expression mode.
Pressing the up arrow increases the vacuum, pressing the down arrow
reduces the vacuum. The vacuum strength is displayed on the bar chart
to the left.

4.3.3. Cycle regulation and display

The cycles (frequency) can be adjusted, one level at a time, by
repeatedly pressing, or by holding down the cycle button (to the
right side of the key pad). The cycle can be individually regulated in both
stimulation mode and expression mode.
Pressing the up arrow increases the cycles level, pressing the down arrow
reduces the cycles level. The cycles level is displayed on the bar chart to
the right.
CARUM
e
f
00:00
Vacuum
d
m
l
c
b
a
en
g
Cycles
h
i
j
k
CARUM
00:00
Vacuum
Cycles
CARUM
02:00
Vacuum
Cycles
CARUM
00:00
Vacuum
Cycles
9

Publicité

Table des Matières
loading

Table des Matières