Milwaukee WCE 65 Instructions D'utilisation page 7

Assembly
ENGLISH
All manuals and user guides at all-guides.com
Spanntec-nut
Hexagon nut
3. Lock the work spindle by depressing the spindle lock. Loosen the round nut of the
upper cutting disc with aid of a pin-type face spanner.
4. Loosen the hexagon nut with aid of the fork wrench SW 17. Remove the nut and the
washer.
5. Remove the round nut and the front cutting disc.
Tension flange
6. Remove the Spanntec-spindle with the Spanntec-nut and the lower cutting disc.
1. Insert the tension flange.
2. Assemble the machine in reverse order.
Arrow on diamond cutting discs must agree with arrow on protective hood cover-
direction of rotation.
7
Round nut with drilled
holes in one face
Spanntec-spindle
WCE 65