Milwaukee WCE 65 Instructions D'utilisation page 10

Cutting in
corners
Service
Accessories
ENGLISH 10
All manuals and user guides at all-guides.com
The driving motor can be swivelled approx.
90 °. This makes it possible to cut from cor-
ner to corner up to a few centimetres. If swiv-
elling is not required the driving motor can be
locked in one position with aid of the swivel
lock.
Keep the machine and the ventilation slots clean.
Use only Milwaukee accessories and spare parts. Should components which have
not been described need to be exchanged please contact one of our Milwaukee
service agents (see our list of guarantee/service addresses)
If needed, an exploded view of the tool can be ordered. Please state the ten-digit
No. as well as the machine type printed on the label and order the drawing at your
local service agents or directly at:
Atlas Copco Electric Tools GmbH, Postfach 320, D-71361 Winnenden.
Please refer to page 2 for range of accessories. Further accessories with part num-
bers are shown in our catalogues.
Swivel lock
WCE 65