Retevis RT32 Mode D'emploi page 4

Instructions for use
This set includes 2 walkie-talkie units: these are communication devices
which operate on mobile radio frequencies. They come with 8 channels as
well as a back-lit LCD screen, enabling you to communicate over several
kilometers free-of-charge.
NOTE: Please read these user instructions carefully before using the
equipment and retain for future consultation!
SPECIFIC RECOMMENDATIONS
• If you carry any kind of personal medical disease, consult a doctor before
use.
• To avoid the risk of burns, do not use the device if the antenna is
damagedin any way.
• Do not use the device in a potentially explosive environment (e.g. around
petrol pumps, on the lower deck of a boat or around a fuel storage
installation or chemical products)
• Switch off the device if on an airplane or in a hospital.
• Never use the device in close proximity to a radio to avoid interference.
• Remove the batteries if the device is not in use for an extended period of
time. Never mix used and new batteries
• Leave the transmitter and antenna at least 5 cm from your face.
• Direct the antenna upwards and speak normally.
• Clean the device with a damp cloth. Do not use cleaning agents and
solvents.
• Do not modify the device in any way. If the device damaged, please
checked by a qualified professional.
• The device cannot be used to contact the emergency services.
ITEM DESCRIPTION (Pic01,02)
1. Antenna
2. RX icon -Displayed when receiving
TX icon -Displayed when transmitting
3. TX power high or low
4. Up adjustor button (▲)
5. Continued reception (MON)
6. On / off button ( )
7. Down adjustor button (▼)
8. Earphone socket
9. Loud speaker
10. Microphone
11. Enter the menu settings (Menu)
All manuals and user guides at all-guides.com
03
12. Call button ( )
13. Keypad lock indicator
14. Battery level indicator
15. Push to talk (TALK) button
16. VOX indication
17. Scanning indication:
Displayed during scan mode
18. Channel/Menu item indication
19. CTCSS/Menu option-value
20. Lamp Button
21. Scan Button
22. Lamp
23. Belt attachment clip
24. Belt attachment
25. Batteries (not supplied)
26. Battery compartment
To install the batteries
Remove the belt clip:there are a secret button to press, then take the belt
off.Open the battery compartment (26) and insert 4AAA batteries (25)(not
supplied),ensuring that the poles are correctly alighed.The closed the lid
USING THE WALKIE TALKIE
1. Turning the divice on/off:
To turn the divice on or off, hold down the on/off button(6) for
3 seconds, a beep sound will be played to cofirm.
2.Adjusting the volume:
To increase the volume, press the Up adjustor button ▲(4) and press the
▼(7) button to decrease volume.
Note: The volume level number is displayed on the screen.
3.Battery Charge Level/Low Battery Indication
The battery charge level is indicated by the number of squares present
inside the battery icon on the LCD screen.
Battery Full
Battery 2/3 charged
Battery 1/3 charged
Battery empty
When the battery charge level is low, the battery icon will flash and a beep
will be heard to indicate that the batteries need to be replaced or
recharged.
04