Jeulin 545 017 Mode D'emploi page 10

Geology
Radiation meter
Ref :
545 017
2. First start up
Power supply through
12V – 500mA mains
module
Digital monitor
Settings: Min. Max
Alignment mark
2 half-disks:
- Choice of filter
- Choice of diaphragm
ENGLISH
Radiation meter
fixing screw

Start up: 12V power supply module provided (reference : 281 243).

The Min and Max buttons control amplification, and are used to set the
measurement range for a reading between 0 and 100% regardless of the spectral
band chosen.
o
If the signal is too strong when the « min » or « max » is being set, then the
letters Hi appear on the screen showing that it is impossible to make the
measurement.
o
If the signal is too weak when the « min » or « max » is being set, then the
letters Lo appear on the screen showing that it is impossible to make the
measurement.

The two half disks turn independently so that the user can choose the working
spectral range (R for Red, G for Green, B for Blue, IR for Infra Red and NF for No
Filter) and the aperture (more or less large).
Radiation meter
9
Multimeter or
CAT output