Lanaform ABPM-100 Manuel D'instructions page 13

All manuals and user guides at all-guides.com
ELECTROMAGNETIC COMPATIBILITY INFORMATION
The customer or the user of ABPM-100 should assure that it is used in such an environment.
Emissions test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
The customer or the user of ABPM-100 should assure that it is used in such an environment.
Immunity test
Electrostatic discharge (ESD)
IEC 61000-4-2
Power frequency
(50/60 Hz)
Magnetic field
IEC 61000-4-8
Guidance and manufacture's declaration - electromagnetic emissions
ABPM-100 is intended for use in the electromagnetic environment specified below.
Compliance Electromagnetic environment - guidance
Group 1 ABPM-100 uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
Class B ABPM-100 is suitable for use in all establishments other than domestic
and those directly connected to the public low-voltage power supply
network that supplies buildings used for domestic purposes.
Not applicable
Not applicable
Guidance and manufacturer's declaration - electromagnetic immunity
ABPM-100 is intended for use in the electromagnetic environment specified below.
IEC 60601test level Compliance level
± 6 kV contact ± 6 kV contact
± 8 kV air ± 8 kV air
3 A/m 3 A/m
Electromagnetic environment - guidance
Floors should be wood, concrete or ceramic tile. If
floors are covered with synthetic material, the
relative humidity should be at least 30 %.
Power frequency magnetic fields should be at
levels characteristic of a typical location in a
typical commercial or hospital environment.
ABPM-100 EN Instruction manual
EN FR NL DE SL SV
11
/ 74