Torin BIG RED T31002 Guide D'utilisation page 5

GENERAL SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result
in serious injury.
CAUTION: Do not allow persons to operate or assemble this equipment until they have read this manual
and have developed a thorough understanding of how the equipment works.
WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot
cover all possible conditions or situations that could occur. It must be understood by the operator
that common sense and caution are factors that cannot be built into this product, but must be supplied by
the operator.
USE AND CARE
• Do not modify the equipment in any way. Unauthorized modification may impair the function and/or safety
and could affect the life of the equipment. There are specific applications for which the equipment was
designed.
• Always check of damaged or worn out parts before using the equipment. Broken parts will affect the
equipment operation. Replace or repair damaged or worn parts, or missing parts immediately.
• Store idle. When equipment is not in use, store it in a secure place out of the reach of children. Inspect it for
good working condition prior to storage and before re-use.
• Not for use by children or people with reduced mental capacity.
• Do not use under the influence of drugs or alcohol.
• Ensure children and other bystanders are kept at a safe distance when using equipment.
INSPECTION
• Inspect the equipment carefully before each use. Ensure the equipment is not damaged, excessively worn,
or missing parts.
• Do not use the equipment unless it is properly lubricated.
• Using equipment that is not in good clean working condition or properly lubricated may cause serious injury.
• Inspect the work area before each use. Make sure it is free and clear of any potential hazards.
DO NOT OPERATE OR REPAIR THIS EQUIPMENT WITHOUT READING THIS MANUAL.
To maintain the equipment and user safety, the responsibility of the owner is to read and follow these
instructions.
• Inspect the equipment for proper operation and function.
• Keep instructions readily available for equipment operators.
• Make certain all equipment operators are properly trained; understand how to safely and correctly operate
the unit.
• Allow unit operation only with all parts in place and operating properly.
• Use only genuine replacement parts.
• Service and maintain the unit only with authorized or approved replacement parts; negligence will make the
equipment unsafe for use and void the warranty.
• Carefully inspect the unit on a regular basis and perform all maintenance as required.
• Store these instructions in the handle of your equipment.
• Keep all decals on the unit clean and visible.
GENERAL SAFETY RULES
IMPORTANT SAFETY CONSIDERATIONS
5