Torin BIG RED T31002 Guide D'utilisation page 15

2. Unscrew and remove bolts and nuts as show
in image below and remove the long ram (No.25).
Remove the long ram (25).
Note: Use caution when removing long ram.
3. Remove the oil plug.
4. Turn the long ram on its side to drain old oil from
the oil fill hole.
Oil Plug
5. Position the long on level ground in the vertical
position and keep hydraulic ram in the lowered
position.
6. Fill the oil case until oil level is just beneath the
lower rim.
KEEP DIRT AND OTHER MATERIAL CLEAR
WHEN POURING.
7. Replace the oil plug.
15
Oil Plug
Oil Plug