Westfalia 81 71 81 Mode D'emploi page 22

Before first Use
Take the farm jack out of the packaging and check for any damage in transit.
Dispose off packaging materials or store it out of reach of children.
Lifting the Load
1. Place the farm jack on a firm and level
ground.
2. Position the farm jack upright and place
the lifting clamp (3) under the correct lifting
point for the load to be lifted.
3. Lift the lever (2) upright so the lever is
parallel to the steel bar (1), (
4. Insert the sleeve (4) on the reversing latch
(7). See also the picture on the bottom
Step 2.
right side (
5. Now roughly lift up the reversing latch (7)
in order to engage in place (
6. Hold the farm jack straight upright and move the lever up and down. The
lifting clamp will raise and lift the load. Each time you move the lever up and
down you will hear a "click" sound. After each "click" sound move the lever
completely upright and repeat pumping until the load is lifted up to the desired
height.
Lowering the Load
To lower the applied load slowly and step by step,
minimum weight of 75 kg is necessary. When lowering
the clamp with less than 75 kg or without load, the lifting
clamp will be lowered abruptly. There is risk of injury!
1. Position the lever (2) parallel to the steel bar (1).
2. Insert the sleeve (4) on the reversing latch (7) (see
picture) and roughly press down the reversing latch
in order to disengage the latch.
All manuals and user guides at all-guides.com
Step 1.
).
Step 3.
Using
).
).
17
1.
3.
2.