NUK Easy Control 200 Mode D'emploi page 34

8. Faults and how to remedy them
Fault
Parent unit does not work
Baby unit does not work
All manuals and user guides at all-guides.com
Cause
Batteries have run out
Batteries wrongly inserted
or not inserted at all
Mains adapter not
connected
Parent unit is not switched
on
Faulty electronics
Mains adapter not
connected
Faulty electronics
Charge batteries (see "5. Setting up the
power supply" on page 23)
Check batteries
If the batteries have run out, power must
be supplied via the mains adapter.
Press on/off button for at least 3
seconds
Arrange for device to be repaired by a
service centre
Connect mains adapter
Arrange for device to be repaired by a
service centre
26
Remedy