Publicité
Les langues disponibles
Les langues disponibles
• Position the round plastic spacer at each mounting hole location. To help hold the spacers in-place, position the
small diameter end of the spacer towards the TV/Monitor case. Lift, align the screws onto the spacers and hold the
TV/Monitor in position.
• Insert the first threaded mounting shaft (supplied) into the bottom of the TV/Monitor, and tighten using a flat blade
screw driver.
• Insert the remaining 3 threaded mounting shafts (supplied) and tighten.
• Complete all the connections on the back of the TV/Monitor, if they were not made before attaching the TV/Monitor
to the cabinet.
Powering Up the System
Once all connections throughout the system have been checked, the power cable plug can be plugged into a 120 VAC
duplex outlet. Refer to the homeowner's manual for operating instructions.
All manuals and user guides at all-guides.com
17
Publicité
