Westfalia JN2 Instructions Originales page 9

Please note the included General Safety Notes and the following
safety notes to avoid malfunctions, damage or physical
injury.
Please also observe the safety notes in the manuals
for battery and charger.
▪ Please read this manual carefully and use the unit only according to this manual.
▪ When using the tool, use safety equipment including safety glasses and ear
protection. If operating the tool causes discomfort in any way, stop immediately
and review your method of use.
▪ Dispose of used packaging material carefully or store it out of the reach of children.
There is a danger of suffocation!
▪ Persons with limited physical, sensorial or mental abilities are not allowed to use
the unit, unless they are supervised and briefed for their safety by a qualified
person.
▪ Battery chargers are for indoors use only. Ensure that the power supply and
charger are protected against moisture at all times.
▪ Use the high-pressure cleaner only in accordance with these instructions, for
cleaning surfaces and objects outdoors. The appliance is not intended for
commercial use.
▪ Never point the pressure washer at people, animals, plants or yourself. Do not
point the pressure washer at equipment with electrical components.
▪ Before switching on the pressure washer, ensure that there is a sufficient water
supply. The unit can be damaged by running dry.
▪ Check all screws, nuts and other fastening elements for tightness at regular
intervals and tighten them if necessary.
▪ Only store the high-pressure cleaner when it is dry. To do this, run the high-
pressure cleaner disconnected from the water source until no more water comes
out.
▪ The water temperature must not exceed 60 °C. Only use cleaning additives that are
neutral and biodegradable.
▪ Use a backflow preventer if you operate the unit on the public drinking water
supply.
▪ Periodically check all nuts, bolts and other fixings and tighten where necessary.
▪ Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
SAFETY NOTES
9