Publicité
Les langues disponibles
Les langues disponibles
EASYZONE MOTORIZED PLENUM ASSEMBLY
Assembly in the indoor unit
It is recommended to insulate all metal parts of the Easyzone that remain in contact with the
outside to prevent condensation.
If your unit has a front with circular
adapters, remove this and mount the
supplied adapter.
Place the Easyzone body in position and fix
it to the neck (previously installed) using
the screws supplied.
Use threaded rods to fix the Easyzone to
the ceiling through the tabs found at each
end.
Place the Easyzone neck over the unit's
supply vent and fix it using the screws
supplied.
Be sure to insulate the connection neck.
Use strips of 25 mm thick insulation
material
(glass
wool
foam). The width of these insulation strips
is 97 mm for the Standard and Medium
motorized plenum and 37 mm for the Slim
motorized plenum.
or
polyethylene
5
EN
Publicité
