4
Back rest adjustment
To adjust the back rest inclination, operate the lever on the back rest and position it in the desired
position. The back rest can be set to 3 positions.
5
Use of the seatbelt
and secure your child when using the baby rocker.
To close the seatbelt, insert both side parts of the seatbelt into the buckle centre until it audibly
engages with a "clicking sound".
Make sure that the tension is correct and the seatbelt fastening is proper. Adjust the seatbelt
length.
To open the seatbelt, press the knob in the buckle centre, thereby the seatbelt side parts open
automatically and you can pull your child from the seatbelt.
6
Removing the cover
The cover can be removed from the rocker for cleaning. Bring the rocker into the topmost position.
Remove the seat strengthener by opening the zip at the back of the seat and then remove the
strengthener. Now open the zip at the foot part and then pull the cover carefully over the back rest.
CAUTION: The cover must not be cleaned with chemicals. Observe the care and cleaning instruc
tions in this manual.
To put the cover back on the rocker, connect the cover with the lower half of the frame by closing
the zip. In order to pull the cover above the back rest, you must bring the back rest in a 45° positi
on. To do that, hold both the lever on the back rest and the knob on the frame side down and fold
the rest to the front into the corresponding position.
Now pull the cover above the back rest over the adjusting lever. Fold the back rest back until it
audibly engages and the cover is taut. Now re-insert the seat strengthener into the opening at the
back of the seat and close the zip.
All manuals and user guides at all-guides.com
GB
-
-