Magnasonic MCD5304-2 Mode D'emploi page 3

FUNCTIONS AND CONTROLS
1. PROG. button
2. SKIP/SEARC H forward button
3. LINE-OUT socket
4. SKIP/SEARC H backward button
5. PH ON ES socket
6. VOLU ME control knob
7. DBBS switch (DYNAMIC BASS BOOST)
8. CD Door Open switch
9. DC 4.5 V INPUT socket
10. H OLD switc h
11. LCD display
12. PLAY/PAUSE button (Power On)
13. STOP button (Pow er Off)
14. M ODE button
15. R AN DOM button
1
2
3
4
5
6
7
8
EN - 3
All manuals and user guides at all-guides.com
9
10
11
R A ND OM
12
13
14
15
POWER SUPPLY
Use with regular batteries
1. Open the battery compartment door, located on the bottom of the unit, by sliding the
door and lift it up. (Do not remove the battery door).
2. Insert 2 x 1.5V /UM-3/AA size alkaline batteries, following the correct polarity, as
indicated on the unit.
3. Close the battery compartment door.
Use with AC/DC adaptor( not included )
1. Insert the DC pl ug, at the end of the AC/DC adaptor cord, into the DC 4.5V INPUT
socket located on the back of the unit.
2. Connect the AC/DC adaptor into a 110V ~ 60Hz AC power outlet.
Notes:
If the AC adaptor is connected when regular batteries are installed, the power supply
automatically switches to the AC power source.
Use only Magnasonic Approved AC/DC adaptors.(Visit www.magnasonic.ca for support).
Make sure that the AC/DC adaptor matches with your household voltage before connecting
it into the wall outlet.
When not using AC power, disconnect the AC/DC adaptor from the wall outlet.
Do not touch the AC/DC adaptor with wet hands.
EN - 4