HP 4110 Guide Rapide page 4

E
N
HP 4110 Quick Start Guide
G
L
I
This quick start guide describes the installation, setup, and operation of the HP 4110. For
S
H
further information, please refer to the Work Smart guides on the phone or refer to the
User Guide at
http://hp.com/networking
Important Information
Please read the instructions on safety and disposal and on how to
set up and use the device before actually using it (Page 18). Also,
give these instructions to other users to read or inform those users of
their contents. Save this manual and do not give the device to third
parties without it.
First Steps
Delivery Contents
The equipment/supplies included with the HP 4110 IP Phone are
shown here.
Note: The phone is a PoE phone. If you are not using PoE in your
network configuration, an external power supply is required. The
only power supply covered under the HP warranty is the HP 5V
external power supply (J9767A). See your HP sales representative
for more details. Caution: A 48V supply, as used by other IP phone vendors,
will permanently disable this phone.
4
All manuals and user guides at all-guides.com
Click Support and search for J9765A.
.
ENGLISH