Jeulin 453 110 Manuel D'utilisation page 5

ExAO method
Angle Unit with analog output
Ref : 453 110
1. Description
The analog output angle unit, when attached to the electronic cone pulley (Part no.:
453109, not supplied), enables the computerization of angle measurements.
1 – 230 V / 12 V mains adaptor socket
2 – Push-button to select the rated capacities -45°/+45° and -180°/+180° with monitoring
3 – 0 calibration push-button for the 2 rated capacities
4 – Rated capacity calibration push-button -45°/+45°
5 – 6-pin DIN plug for connecting the pulley
6 – Analog output -5 V / +5 V
7 – Tiltable unbreakable support
2. Technical characteristics
Rated capacities:
Calibration
Dimensions (in mm)
ENGLISH
5
7
LED
Selected by push-button (2):
-45°/+45°,
-180°/+180°,
By push-button:
-45°/+45°, at two points (3) and (4)
-180°/+180°, at one point (3)
L. 100 x b. 100 x h. 40
1
accuracy +/-2%
linearity error: +/-1%
accuracy +/-1%
Resolution 0.75°
4
6
4
3
2