Making A Voice Distress Call - Uniden MHS335BT Guide D'utilisation

Table des Matières

Publicité

Lift the red cover. Press and hold the
MAKING A DISTRESS CALL
for three seconds. Your radio transmits
your ship's location every few minutes until you
receive a response.
NOTE: If the radio displays Enter User MMSI, cancel the
#
automatic distress call and make a normal voice distress call.

Making a Voice Distress Call

For future reference, write your ship's name & call sign here:
Speak slowly - clearly - calmly.
1.
Make sure your radio is on.
2.
Press the
does not show 16, press the
16/P key
3.
Press the
4.
Say "THIS IS {name of your ship (three times)} and call sign/ship registration
PUSH-TO-TALK key
5.
Repeat "MAYDAY {name of your ship}" once.
number (once)."
6.
Tell where you are: (what navigational aids or landmarks are near, or read the
latitude and longitude from your GPS).
7.
State the nature of your distress (e.g. are you sinking, medical emergency, man
overboard, on fire, adrift, etc. ).
8.
State the type of assistance you need (medical, towing, pumps, etc.).
9.
Give number of persons aboard and conditions of any injured persons.
10. Estimate present seaworthiness of your ship (e.g. how immediate is the danger due
to flooding or fire or proximity to shore).
11. Briefly describe your ship, giving ship name (e.g. "Blue Duck is 32 foot cabin cruiser,
white hull, blue deck house").
12. Say: "I WILL BE LISTENING ON CHANNEL 16."
13. End message by saying "THIS IS {name or call sign of your ship}, OVER."
14. Release the
PUSH-TO-TALK key
If you do not get an answer after 30 seconds, repeat your call, beginning at step 3, above.
to switch to Channel 16 (156.8 MHz). (If the corner of the display
and say: "MAYDAY -- MAYDAY -- MAYDAY."
16/P key
and listen.
DISTRESS key
again until it does.)
Lift the red cover
and press the white
DISTRESS button
underneath.

Publicité

Table des Matières
loading

Table des Matières