Remote Control Operation - THOMSON THVC94148 Manuel D'instructions

REMOTE CONTROL OPERATION

Button <
4.
In standby, pause or operating mode, press this button and the
robot will go into charging station search mode.
Button <
5.
> In standby, paused or operating mode, press this button and the
robot goes into cleaning mode
"AUTO". The device adapts its navigation according to
the environment.
Button <
6.
In pause mode or in operating mode, press this button and the robot
will go into cleaning mode
"SPOT", The appliance cleans in a circle from a
punctual place.
Button <
7.
In standby, pause or working mode, press this button and the robot
will go into cleaning mode
"ZIGZAG". The device moves in zigzags but changes
often management.
Button<
(EDGE)>
8.
In standby, pause or working mode, press this button and the robot
will go into cleaning mode
"EDGE". The device cleans along the walls.
Button <
9.
In standby, pause or working mode, press this button and the
robot will go into cleaning mode
"Powerful aspiration".
In this operating mode, the suction power of the robot will be
enhanced.
Note :
Please install the battery before use.
1.
If the remote control will not be used for a long time, remove the
2.
batteries.
(HOME)>
AUTO> -
(TASK)>
ZIGZAG>
(SUCTION)>
EN-16