Installation And Connection; Operation - Bartscher A150.513 Mode D'emploi

•
Do not lay the cable over carpets or heat insulations. Do not cover the cable.
Keep away the cable from operating range and do not dunk it into water.
•
Do not move or tilt the device when in operation.
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label).
Connect the device only in case of compliance! Take note of the security advice!

5.2 Installation and connection

•
Discard the complete packing material after unpacking the device.
•
Place the device on top of an even and safe surface which supports the weight of
the device and is not heat sensitive.
•
Not at any time should you place the device on an inflammable surface (such as:
table cloth, carpet, etc.).
•
You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
•
Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.

5.3 Operation

•
Before using the rice cooker for the first time the removable inner pot and the inner lid
should be washed with a warm soapsuds and rinsed off and dried thoroughly
afterwards.
CAUTION!
Ensure that the inner pan is dry and clean on the outside.
•
The inside and outside of the outer pot should be wiped thoroughly with a soft and
damp cloth in order to remove dust that has gathered during packing and transport.
Not at any time the outer pot should be dunked into water or other fluids.
•
After accomplishment of the above shown steps the inner pot is to be reinserted into
the outer pot. Do not fill the outer pot with water or other fluids.
- 25 -