Publicité
Les langues disponibles
Les langues disponibles
7. Wiring.
WARNING: Turn off circuit breakers to current
fixture from breaker panel and be sure switch
is turned to the OFF position.
CAUTION: Be sure outlet box is properly
grounded and that a ground wire (GREEN or
Bare) is present.
Make sure all electrical connections comply with
Local Codes or Ordinances and the National
Electrical Code. If you are unfamiliar with
electrical wiring or if the house/building wires
are different colors than those referred to in the
diagram to the right, please use a qualified
electrician.
Note: Excess lead wire length from the fan can
be cut to the desired length and then stripped.
Once fan has been temporarily hung on the
mounting plate, electrical wiring can be made
as follows:
Connect BLACK wire (labeled AC IN L) from
remote control receiver to BLACK supply wire
from ceiling with wire connector provided.
Connect WHITE wire (labeled AC IN N) from
remote control receiver to WHITE supply wire
from ceiling with wire connector provided.
Connect GREEN/YELLOW wire from remote
control receiver to BARE/GREEN wire from
ceiling with wire connector provided.
Connect BLUE wire (labeled FOR LIGHT) from
remote control receiver to BLACK wire from fan
with wire connector provided with wire
connector provided.
Connect WHITE wire (labeled FOR LIGHT) from
remote control receiver to WHITE wire from fan
with wire connector provided.
Connect RED wire from remote control receiver to
RED wire from fan with wire connector
provided.
Connect YELLOW wire from remote control
receiver to YELLOW wire from fan with wire
connector provided.
Connect GRAY wire from remote control receiver
to GRAY wire from fan with wire connector
provided.
* Wrap each wire connector separately with
electrical tape as an extra safety measure.
Gently place receiver and taped wire
connectors into top of canopy assembly.
ground (green
or bare)
black
white
red
yellow
gray
from fan
from
receiver
gray
yellow
red
white
blue
(wiring for receiver)
page 8
white supply wire
black supply wire
ground (green or bare)
ground (green)
white
from ceiling
from receiver
antenna
white
AC IN N
black AC IN L
receiver
ground (green/yellow)
black
*
Publicité
