DAL DEGAN DL218 Manuel D'emploi Et D'entretien page 102

34
MODEL DL 250 EL
1) Electric box.
2) Pressure regulating lever.
3) Outlet valve lever.
4) Pressure reset lever.
5) Suction.
6) Outlet.
7) Tank inlet.
MODEL DL 250 Sc
1) Pressure regulating lever.
2) Fuel valve lever (if installed).
3) Fuel enrichment pump (primer).
4) Accelerator.
5) Engine starter handle.
6) Outlet valve lever.
7) Suction.
8) Outlet.
9) Tank inlet.
• Before supplying power, check that the line voltage is the same as the one indicated on the engine rating plate.
• Never touch or operate the commuter with wet or very sweaty hands, because this could cause an electric shock if
the commuter displays wear not visible to the naked eye. We therefore recommend that you always wear gloves.
diaphrams pUmps
4
7
6
3
9
8
6
ELEcTRIc ENgINE START-UP
1
5
2
1
7
2
4
5
3