Télécharger Imprimer la page

GreenWorks Pro BLB489 Manuel D'opérateur page 10

Masquer les pouces Voir aussi pour BLB489:

Publicité

Les langues disponibles

Les langues disponibles

Clear the unwanted material out of the air vent with a
vacuum cleaner.
Do not spray the air vent or put the air vent in solvents.
Clean the housing and the plastic components with a
moist and soft cloth.
13
TRANSPORTATION AND
STORAGE
WARNING
Remove the battery pack from the machine before
transportation and storage.
13.1
MOVE THE MACHINE
Only hold the machine with the handgrip.
13.2
STORE THE MACHINE
Clean the machine before storage.
Make sure that the motor is not hot when you store the
machine.
Make sure that the machine does not have loose or
damaged parts. If it is necessary, do these steps/
instructions:
Replace the damaged parts.
Tighten the bolts.
Speak to a person of an approved service center.
Store the machine in a dry area.
Make sure that children cannot come near the machine.
14
TROUBLESHOOTING
PROBLEM
POSSIBLE
CAUSE
The battery pack is
The motor does
not installed tight-
not start when
ly.
you pull the trig-
ger.
The battery pack is
out of power.
The power switch
is defective.
The machine does
The motor is defec-
not start.
tive.
The PCB board is
defective.
The air does not
The air inlet or
flow through the
tube outlet has a
tube when you
blockage.
start the machine.
English
15
Voltage
Air volume
Air speed
Weight (without
battery pack)
Battery model
Charger model
The recommended ambient temperature range:
Item
Blower storage temperature
range
Blower operation tempera-
ture range
Battery charging temperature
range
Charger operation tempera-
ture range
Battery storage temperature
range
Battery discharging tempera-
ture range
16
SOLUTION
Make sure that
you tighlty install
the battery pack in
the machine.
Charge the battery
pack.
Greenworks hereby warranties this product, to the original
purchaser with proof of purchase, for a period of four (4)
years against defects in materials, parts or workmanship.
Replace the defec-
Greenworks, at its own discretion will repair or replace any
tive parts by an ap-
and all parts found to be defective, through normal use, free
proved service
of charge to the customer. This warranty is valid only for
center.
units which have been used for personal use that have not
been hired or rented for industrial/commercial use, and that
have been maintained in accordance with the instructions in
the owners' manual supplied with the product from new.
Remove the block-
age.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to misuse,
9
TECHNICAL DATA
80 V
730 CFM
170 MPH (274 Km/h)
5.3 lbs. (2.4 kg)
BAB727 and other BAB series
GCH8020 and other CAB series
Temperature
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
39°F (4°C) - 104°F (40°C)
39°F (4°C) - 104°F (40°C)
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
LIMITED WARRANTY
GARANTIE OUTIL &
BATTERIE • GARANTÍA PARA
HERRAMIENTAS Y BATERÍAS
commercial use, abuse, neglect, accident, improper
maintenance, or alteration; or
EN

Publicité

loading