Publicité
Les langues disponibles
Les langues disponibles
7. COMPLETING THE INSTALLATION
7.1 Anti-tipping safety assembly
If the appliance(s) is not connected through
the side profile trims to secured cabinetry
you must install the anti-tip brackets to en-
sure the product does not fall forward dur-
ing use and cause damage or injury. Failing
to secure the appliance(s) securely will void
any warranty claim attributable to a tipping
situation.
Operate as follows:
> The brackets should be applied as illustrated us-
ing the provided screws If using the anti-tip brack-
ets, lag into wood framing or concrete - drywall will
not hold the weight of appliance.
Place a bracket on the top of the appliance in corre-
spondence to the fixing holes and against the wall
[ 1 ].
" )
⁄
1
1
4 5 (
> Mark up the holes position on the wall [ 2 ].
2
> Drill the wall with an 8 mm (3/8") bit and insert
the expansion plug [ 3 ].
3
> Reposition the bracket and fix it first to the cabi-
net and then to the wall [ 4 ].
4
In order to use the anti-tip brackets on the
top compressor models, it will be neces-
sary to temporarily remove the top, metal
ceiling / shield to access the bolting points
for the brackets./ shield to access the bolt-
ing points for the brackets.
2 x
6 x
EN
23
Publicité
