Glacier bay HD873X-4004 Guide D'installation Et D'entretien page 12

Adjusting the temperature
5
Reinstall the red limit stop ring
□
Reinstall the red limit stop ring (1) and readjust
the teeth engagement position so that the stem
can not move beyond the adjusted point.
6
Reinstalling the handle,
escutcheon, and inverter
□
Place the inverter (1) onto the valve body (D)
and secure with the screw (2).
□
Screw the sleeve (3) onto the valve body (D).
□
Place the escutcheon (E) onto the valve
body (D) and secure with the escutcheon
screws (AA).
□
Place the handle (F) onto the valve body (D)
and secure with the set screw (G).
E
AA
F
G
12
1
D
1
2
3