Setting up your dishwasher
INSTALLING YOUR DISHWASHER
(ONLY FOR INSTALLING UNDER THE SINK)
SAMSUNG Electronics is not responsible for any product failure or damage that is caused by installing
FREE STANDING MODEL under the sink.
CAUTION
STEP 1. Removing the work top
1. Remove the 2 screws from the upper part on the back of the dish
washer.
2. Slide the work top backward and then lift it up to separate it.
You may dispose the plastic part that is supporting the worktop.
Make sure to screw the upper trim that is revealed when disposing
the plastic part.
FS_DW9000H-00158C-06_EN.indd 18
FS_DW9000H-00158C-06_EN.indd 18
English - 18
2016-08-12
2016-08-12
5:36:52
5:36:52