Publicité
Les langues disponibles
Les langues disponibles
SAFETY TIPS.
WARNING: To reduce the risk of electrical shock, turn off the electricity at the main fuse box or circuit panel
before you begin installation of the accessory.
1.
READ ALL INSTRUCTIONS AND SAFETY INFORMATION CAREFULLY BEFORE INSTALLING YOUR
ACCESSORY AND SAVE THESE INSTRUCTIONS.
CAUTION: To avoid personal injury, the use of gloves may be necessary while handling parts with sharp
edges.
2.
Make sure all electrical connections comply with Local Codes or Ordinances, the National Electrical
Code, and ANSI/NFPA 70-1999. If you are unfamiliar with electrical wiring or if the house/building
wires are different colors than those referred to in the instructions, please use a qualified electrician.
3.
Make sure the location you selected for your fan allows clear space for the blades to rotate and at
least seven (7) feet (2.13 meters) of clearance between the floor and the fan blades. The fan should
be mounted at least thirty (30) inches (76 centimeters) from walls or other upright structures.
4.
The outlet box must be securely mounted and must be capable of supporting the accessory as well as
the fan you are installing it with, i.e., a total of at least 35 pounds (16 kilograms). The outlet box
must be supported directly by the building structure. Use only ETL or UL listed outlet boxes marked
"FOR FAN SUPPORT."
WARNING: To reduce the risk of fire, electrical shock, or personal injury, fan must be mounted to outlet box
marked "Acceptable for Fan Support of 15.9 kg (35 lbs.) or less" and mounting screws provided with the
outlet box must be used to do so. Most outlet boxes commonly used for the support of lighting fixtures are
not acceptable for fan support and may need to be replaced. Consult a qualified electrician if in doubt.
5.
Electrical diagrams are for reference only.
6.
After installation is complete, check that all connections are absolutely secure.
7.
After making electrical connections, spliced conductors should be turned upward and pushed
carefully up into the outlet box. The wires should be spread apart with the grounded conductor
and the equipment-grounding conductor on opposite sides of the outlet box.
WARNING: To reduce the risk of serious bodily injury, DO NOT use power tools to assemble any part of the
accessory (or the fan, including the blades).
NOTE: The important safety precautions and instructions appearing in the manual are not meant to cover all
possible conditions and situations that may occur. It must be understood that common sense and caution are
necessary factors in the installation and operation of this accessory.
Warranty.
CRAFTMADE One-Year Limited Warranty:
CRAFTMADE warrants this accessory to the original household purchaser for indoor use under the following provisions:
1-YEAR WARRANTY: CRAFTMADE will replace or repair any accessory which has faulty performance due to a defect in
material or workmanship. Contact Craftmade Customer Service at 1-800-486-4892 to arrange for return of accessory for
repair. Return accessory, shipping prepaid, to Craftmade. We will repair the accessory or ship you a replacement, and we will
pay the return shipping cost.
The purchaser shall be responsible for all costs incurred in the removal, reinstallation and shipping of the product for
repairs.
This warranty does not apply when damage from mechanical, physical, electrical or water abuse results in causing the
malfunction. Deterioration of finishes or other parts due to time or exposure to salt air is specifically exempted under this
warranty.
Neither Craftmade nor the manufacturer will assume any liability resulting from improper installation or use of this
product. In no case shall the company be liable for any consequential damages for breach of this, or any other warranty
expressed or implied whatsoever. This limitation as to consequential damages shall not apply in states where prohibited.
page 2
Publicité
