Intended Use
This appliance serves as
kneading / mixing appliance for making dough, creams,
•
cream, whipped egg whites;
mixer for puréeing, beating, mixing;
•
•
meat grinder for crushing of food. You can form a paste or
dough with different attachments.
It is intended for the use in private households and similar
applications.
It is only to be used as instructed in this user manual. The
appliance is not intended for commercial use.
Use the appliance as either a kneading / mixing appliance
or a mixer or meat grinder. Never use multiple functions
simultaneously.
Any other use is considered improper and may result in
material damage or even personal injury.
The manufacturer is not liable for damages caused by
improper use.
Unpacking the Appliance
1. Remove the appliance from the package.
2. Remove all packaging material such as films, filler, cable
holders and cardboard.
3. Check the delivery contents for completeness.
4. Should the package contents be incomplete or damages
be found, do not take the appliance into operation. Take it
immediately back to the dealer.
NOTE:
Dust or production residues can be located on the appli-
ance. We recommend to clean the appliance as described
under "Cleaning".
Overview of the Components /
Scope of Delivery
Page 3
1 Cap of the lid (measuring cup)
2 Grip recess on lid
3 Lid
4 Unlock button
5 Mixing bowl
6 Safety cover for mixing engine
7 Swivel arm
8 Display
9 Operating buttons
10 Release button for lowering / raising the arm
11 Knob
12 Motor housing
13 Mixing bowl
14 Splash guard
15 Cover for meat grinder engine
16 Meat grinder with filling tray and darner
58
KM1395CB_IM
17 Whisk
18 Stirring hook
19 Dough hook
20 Protection shield
Page 4: Assembly of the Meat Grinder
21 Pusher
22 Filler tray
23 Worm housing filler neck
24 Spiral
25 Silicone coupling
26 Knife
27 3 sieves (fine, medium, coarse)
28 Locking ring
29 Dough divider
30 Sausage attachment
31 2-part attachment "Kebbe"
32 Biscuits attachment
33 Biscuits cutter form
34 3 pasta attachments (different pasta shapes)
Electrical Connection
Check whether the power supply that you want to use coin-
cides with that of the appliance. The information can be found
on the nameplate.
Functionality of the Appliance
Protective Features
The appliance is equipped with safety switches.
•
The appliance can only be operated if the following is
observed:
- The safety cover (6) is installed or
- The mixing vessel is attached to the base unit with the
lid locked in place and
- the swivel arm is locked in place in the lowest position.
•
The electronic speed regulation prohibits a motor drive
overload automatically. The revolutions per minute are
automatically regulated in the case of an overload.
Display
Speed levels 01 to 10
Time (Timer)
Turning the Appliance On
After you have connected the appliance to a power sup-
•
ply and all safety switches are closed, the display lights
up. In case the appliance has not been used for approx.
5 minutes, the display turns off. The appliance remains in
standby mode, however.
Turn the rotary knob clockwise to select the desired
•
speed level. The appliance starts to operate. If you do not
turn off the appliance, it will turn itself off automatically
after an operation time of 10 minutes.
22.06.17