HP PS100 Guide De Démarrage Rapide page 5

Pro tips
Only calibrate the scanner when scanner hasn't
been used recently, scanned images are fuzzy, or
color looks inaccurate.
Keep the included calibration sheet away from dust
and debris.
Make sure your documents are free of staples,
paper clips, or other debris that may cause scan to
malfunction.
Do not push your document into the scanner
during operation.
Avoid scanning certain materials. (Ex. wrinkled
material, cloth, newspapers, or magazines.)
Clean the scanner after 200 scans or if vertical lines
or stripes appear on the scanned images.
HP Mobile Scanner PS100
Safety precautions
Please turn off and unplug the scanner when not in use for long periods of time.
*Power rating: 5Vdc, 0.5 A
Do not use scanner if any parts are missing or damaged.
Do not attempt to disassemble or repair the scanner yourself.
Do not use any solvents or corrosive liquid to clean any part of the scanner.
Keep scanner out of direct sunlight and humid, dusty environments.
Always place the scanner on a flat, level surface.
The power input for this scanner is 5 V, 0.5 A. Use only with the USB cable
supplied with the product.
EN | 4