KPS TP5000HY Manuel D'utilisation page 4

All manuals and user guides at all-guides.com
TP5000HY
Single Pole Phase Check
• Single Pole Check is available for both
• Do not check if voltage appears by Single
Continuity Check
Ampere Mode
EN
Warning
test leads. Remove one of test leads
before performing check.
Pole Phase Check. Measure voltage with
two pole to get a reliable result.
Resistor Mode
Warning
The barrier on the body is indicating the limit
of safe access of the hand-held part, do not
hold over the barrier when in normal use.
Do not assemble test lead at the back of the
meter while measuring current.
03