Publicité
Les langues disponibles
Les langues disponibles
CONTROLS AND OPERATIONAL FEATURES
Figure 1
11
14
13
15
1.
Powered unit green LED; when lit, it means that the generator is properly powered and ready for use;
when blinking, it means that the generator is temporarily unusable due to an alarm or a change in
the welding process.
2.
Thermal alarm LED; it lights up if the generator overheats. Note: do not power off the generator and
let it cool down.
3.
Inverter ON LED; generator on welding.
4.
Left Display: during welding, it displays the actual value of the output current (AMP).
When the machine is not welding, no load, the display shows the value of the parameter selected with
the Left Knob (8):
a.
In STICK and TIG mode it shows the selected current value;
b.
In MIG MANUAL mode the display shows the selected wire speed in m/min;
8
12
9
10
17
18
19
21
20
EN-5
4
1
2
3
6
5
7
16
Publicité
