Grease Filter Indicator Lights; Carbon Filter Indicator Lights - Atag WU50 BM Mode D'emploi

USE

Grease filter indicator lights

Carbon filter indicator lights

The indicator light (L1) lights up
After the motor has run for 30 hours, the indicator light will light up; the
grease filter needs cleaning (see 'Maintenance' chapter).
• When the cooker hood is turned on, the indicator light (L1) will light
up for 30 seconds.
• Switch off the cooker hood and the lighting. Press and hold the
lighting button for three seconds to deactivate the warning.
The indicator light (L1) is flashing
After the motor has run for 120 hours, the indicator light will flash; the
carbon filter needs replacing (see 'Maintenance' chapter).
• When the cooker hood is turned on, the indicator light (L1) will flash
for 30 seconds.
• Switch off the cooker hood and the lighting. Press and hold the
lighting button for three seconds to deactivate the warning.
EN 7