Publicité
Les langues disponibles
Les langues disponibles
HDMI
eARC/ARC
1.
Use an HDMI cable to connect the
soundbar's HDMI OUT (eARC/ARC) socket
to the TV's HDMI IN socket.
2.
Use an HDMI cable to connect the soundbar's
HDMI IN (1 or 2) socket to your external
HDMI IN 1 HDMI IN 2
devices (e.g. games consoles, DVD players and
HDMI
eARC/ARC
blu ray).
5.4 Use the OPTICAL Socket
-
Connect an OPTICAL cable to the TV's
OPTICAL OUT socket and the OPTICAL
HDMI IN 1 HDMI IN 2
HDMI IN
socket on the unit.
HDMI IN
OPTICAL
5.5 Use the COAXIAL Socket
•
You also can use the COAXIAL cable to
connect the TV's COAXIAL OUT socket and
OPTICAL
COAXIAL socket on the unit.
COAXIAL
COAXIAL
Tip: The unit may not be able to decode all digital
audio formats from the input source. In this case,
the unit will mute. This is NOT a defect. Ensure
that the audio setting of the input source (e.g. TV,
game console, DVD player, etc.) is set to PCM or
Dolby Digital (Refer to the user manual of the
input source device for its audio setting details)
with HDMI / OPTICAL / COAXIAL input.
5.6 Connect Power
Risk of product damage!
•
the power supply voltage corresponds to the
voltage printed on the back or the underside
of the unit.
12
(TV eARC/ARC)
HDMI OUT
(TV eARC/ARC)
HDMI OUT
Blu-ray Player / DVD Player /
Recorder / Set-top Box...
HDMI OUT
(TV eARC/ARC)
HDMI OUT
Blu-ray Player / DVD Player /
Recorder / Set-top Box...
HDMI OUT
(TV eARC/ARC)
OPTICAL
OPTICAL
COAXIAL
COAXIAL
Ensure that
•
Before connecting the AC power cord, ensure
you have completed all other connections.
•
Soundbar
Connect the mains cable to the AC~ socket
of the main unit and then into a mains
socket.
•
Subwoofer
Connect the mains cable to the AC~ socket
of the Subwoofer and then into a mains
socket.
* Power cord quantity and plug very by regions.
5.7 Pair up with the subwoofer
Automatic pairing
The subwoofer and soundbar will automatically
pair when both units are plugged into the mains
sockets and turned on. No cable is needed for
connecting the two units.
•
Determine the status based on the wireless
Subwoofer indicator.
LED State
Status
Fast blink
Subwoofer in pairing mode
Constant on
Connected / Paired successful
Slow blink
Connection / Pairing Failed
NOTE:
Do not press the Pair button on the rear of
-
the subwoofer, except for manual pairing.
-
If the automatic pairing fails, pair the
subwoofer with the main unit manually.
Manual pairing
1.
Ensure that all the cables are well connected
and the main unit is in Standby mode.
2.
Press and hold the Pair button on the rear
of the subwoofer for a few seconds. The
subwoofer will enter the pairing mode and
the Pair Indicator will blink quickly.
3.
Press
the button on the main unit or on the
remote control to switch the main unit on.
Publicité
