Télécharger Imprimer la page

Atag IG9571MBA/A02 Notice D'utilisation page 168

Publicité

Les langues disponibles

Les langues disponibles

General
NOTE!
If you notice a crack in the glass top (however small), switch off the hob immediately, unplug the
hob, and close off the gas supply.
Then contact the Service Department.
Symptom
Wok burner
There is a smell of gas near
the appliance.
The burner does not ignite.
Error code F4-066
1)
The burner does not burn
evenly.
Burner extinguishes after
igniting.
1)
Error code F3
Possible cause
The appliance connection is
leaking.
The electrical connection is
not correct.
Fuse defective/fuse switched
off in fuse cupboard.
Spark plug (1) dirty/damp.
Burner parts not placed
correctly.
Burner parts dirty/damp.
Main gas supply valve
closed.
Fault in gas mains.
Gas bottle or tank is empty.
The wrong type of gas used.
Burner parts not placed
correctly.
Burner parts dirty/damp.
The wrong type of gas used.
Thermocouple (2) is dirty.
Solution
Turn off the main gas supply valve.
Contact your installer.
Contact your installer.
Replace the fuse or switch on the fuse
again in the fuse box.
Clean/dry the spark plug.
Use the centring notches to put the
burner parts together.
Clean/dry the burner parts. Make sure
that the outflow holes are open.
Open the main gas valve.
Consult you gas supplier.
Connect a new gas bottle or have the
tank refilled.
Check whether the gas used is suitable
for the appliance. Contact your installer
if it is not correct.
Use the centring notches to put the
burner parts together.
Clean/dry the burner parts. Make sure
that the outflow holes are open.
Check whether the gas used is suitable
for the appliance. Contact your installer
if it is not correct.
Clean/dry the thermocouple.
Faults
31

Publicité

loading

Ce manuel est également adapté pour:

Ig9571mbaIg9571mba/a01Ig9571mbb/a02Ig9571mbIg9571mbb/a01