Publicité
Les langues disponibles
Les langues disponibles
Induction operation
Boost
You can use the 'boost' function for cooking at the highest power level during a short time (max
10 minutes). After the maximum boost time has passed, the power will be reduced to setting 12.
Switching off 'boost'
Boost' has been switched on, the display shows setting 12 and boost'.
1. Press the << button or the - button.
In the display you will see a lower setting.
Or:
2. Press the on/off button of the cooking zone you want to switch off.
You will hear a single audio signal and the display dims. The cooking zone has been switched
off completely.
NOTE!
If a cooking zone has already been set to a power level and you want to use 'boost', press several
times the >> button or the + button of the cooking zone concerned.
Two cooking zones behind each other
The two cooking zones which are behind each other affect each other. When both of these
cooking zones are switched on at the same time, the power is shared between them automatically.
The first set cooking zone will remain at the set setting at all times. The maximum set setting for
the cooking zone to the front or back that is added later depends on the setting of the first cooking
zone. When you have reached the maximum amount of cooking setting combinations, the last
set setting will start to flash and is automatically lowered to the highest possible setting.
Two cooking zones next to each other will not influence each other.
You can set both cooking zones on a high setting.
Bridge Induction zone
The Bridge Induction zones can be linked to each other. This creates 1 large zone that can be used,
for example, for a large fish pan or various pans on the same power.
If the Bridge Induction zones are linked, they cannot be set to boost and, the menu functions
cannot be used.
Use a fish pan or other pan covering at least one of the Bridge Induction zones in the middle.
24
Switching on 'boost'
1. Put a pan on a cooking zone and switch on the cooking zone.
2. Press the >> button immediately after you have switched on the
zone.
12' and boost' appear in the display.
Publicité
