Install Grill - KitchenAid 740-0780 Instructions D'installation Et Guide D'utilisation Et D'entretien

Install Grill

Place grill into outdoor enclosure, but leave enough room in the back to
connect to the gas supply.
LP Gas Installation
1. Check that the LP gas pressure regulator/hose assembly is
positioned under the grill (as shown in the following illustration)
and is not pinched or kinked.
2. Use 2 screws and the 1-piece 90° clamp mounting bracket provided
to attach the 90° brass connector to the back of the enclosure. The
brass connector is located between the flexible gas hose and the LP
gas pressure/hose assembly.
A
B
A. 2 screws
B. 1 piece 90° clamp mounting bracket
Grease Cup Bracket Installation
1. Loosen and remove the 4 screws preassembled on the grease
cup bracket.
Attach the left and right grease cup bracket on firebox bottom
2.
panel under side, align screw holes, insert 4 screws which were
removed from step 1 into these screw holes. Screws lock from
firebox bottom panel under side.
3. Tighten these 4 screws.
13