ION Pro Glo Duo iPA96D Guide D'utilisation Rapide page 3

Quickstart Guide (English)
Introduction
1. Make sure all items listed in the
foam sheet for the speaker stand rubber feet, speaker stand mounting knob, power cable, and
microphone.
2. Read the safety instruction booklet before using the product.
3. Study the Connection
4. Make sure all input devices such as microphones, CD players, or digital media players are turned
off and volume settings are set at "zero."
5. Connect all devices as shown.
6. Switch everything on in the following order:
• audio input sources (i.e. microphones, instruments, CD players)
• PA Glow 10
7. When turning off, always reverse this operation:
• PA Glow 10
• any input devices
Box Contents
(2) PA Glow 10
Microphone with Cable
(2) Telescoping Speaker Stand
(2) Remote Control
Power Cable (IEC)
Quickstart Guide
Safety Instructions & Warranty Information Booklet
Support
For the latest information about this product (system requirements, compatibility information, etc.)
and product registration, visit ionaudio.com.
For additional product support, visit ionaudio.com/support.
Caution: Do not expose PA Glow 10 to rain or standing water.
Box Contents
Diagram.
are included in the box. Look in the box under the
3