T_SEN1~2: Thermal Sensor Connector
These connectors allow you to connect the thermistor cable and use it to monitor the
temperature of the detection point.
BIOS_SW1: Multi-BIOS Switch
This motherboard has two built-in BIOS ROMs. If one is crashed, you can shift to the
other for booting by sliding the switch.
⚠
Important
∙
Do not use the Multi-BIOS switch when system is booting up.
∙
You can also use the MSI Center or Flash BIOS Button to flash BIOS. Please refer to
BIOS section for details.
GND
Sense
BIOS B
BIOS A
(Default)
54
Thermistor cable
Multi-BIOS LED
white: BIOS A
red: BIOS B