MSI MEG Z790 GODLIKE Manuel D'installation page 52

JUSB5~6: USB 3.2 Gen 2x2 Type-C Front Panel Connectors
These connectors allow you to connect USB 3.2 Gen 2x2 20Gbps Type-C front panel
connectors on the front panel. The connectors possess a foolproof design. When you
connect the cable, be sure to connect it with the corresponding orientation.
⚠
Important
∙ To achieve USB PD 60W fast charging for JUSB6, the PD_PWR1 connector needs to
be connected to the power supply unit.
∙ JUSB6 doesn't support USB 2.0 and older USB devices.
JUSB3~4: USB 3.2 Gen 1 Connectors
These connectors allow you to connect USB 3.2 Gen 1 5Gbps ports on the front panel.
10 11
1 20
⚠
Important
Note that the Power and Ground pins must be connected correctly to avoid possible
damage.
JUSB6
JUSB5~6
JUSB5
Pin Signal Name
1 Power
3 USB3_RX_DP
5 USB3_TX_C_DN
7 Ground
9 USB2.0+
11 USB2.0+
13 Ground
15 USB3_TX_C_DN
17 USB3_RX_DP
19 Power
50
USB Type-C Cable
USB Type-C port on
the front panel
Pin Signal Name
2 USB3_RX_DN
4 Ground
6 USB3_TX_C_DP
8 USB2.0-
10 Ground
12 USB2.0-
14 USB3_TX_C_DP
16 Ground
18 USB3_RX_DN
20 No Pin