Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT SAFETY INFORMATION
Battery
• Use this tool for manufacturer's intended use only.
Use other than that which is described in this
manual can result in injury or property damage.
• Do not cut guy wire or steel rod.
• Do not cut ACSR with he ESR1000LX
• Do not exceed the rated capacity of the tool.
Failure to observe these precautions may result in
injury or property damage.
Do not allow any object to contact the battery
terminals.
• Do not immerse batteries in liquid. Liquid may
create a short circuit and damage the battery. If
batteries are immersed, contact your service center
for proper handling.
• Do not place the battery into a pocket, tool pouch,
or tool box with conductive objects. Conductive
objects may create a short circuit and damage the
battery.
• Do not place a battery on moist ground or grass.
Moisture may create a short circuit and damage the
battery.
Failure to observe these precautions may result in
injury or property damage.
• This tool is not designed for continuous use. After
40 cutting cycles or if tool becomes hot, allow the
cutting tool to rest for 30 minutes.
• Do not secure this tool in a vice. This is a tool
designed for hand-held operation.
• This tool may be used in damp or wet environ-
ments; however, air-drying is recommended before
use if the tool becomes soaked. Damage may result
when the tool is operated prior to thorough drying
when electrical components are soaked.
• Use this tool for the manufacturer's intended
purpose only
Failure to observe these precautions may result in
injury or property damage.
Greenlee Tools, Inc.
All manuals and user guides at all-guides.com
Battery-powered Ratcheting Cable Cutters
• Do not store the battery at more than 122 F (50 C)
• Do not attempt to open the battery. It contains no
• Do not use another manufacturer's charger. Other
Failure to observe these precautions may result in
injury or property damage.
• Do not perform any service or maintenance other
Failure to observe these precautions may result in
injury or property damage.
Note: Keep all decals clean and legible, and replace
when necessary.
4
or less than -4 F (-20 C). Damage to the battery can
result.
user-serviceable parts.
manufacturers' chargers may overcharge and
damage the battery.
than described in this manual. Injury or damage to
the tool may result.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Publicité
