Gossen MetraWatt KINAX WT 710 Mode D'emploi page 27

Drilling and cut-out
diagram for
fixing with clamps
Fixing with
mounting foot
Basic unit for fitting to
measuring instruments
with revolving indicator
shaft
Drilling and cut-out
diagram for measuring
instrument housing
Accessory kit for
pressure gauge mounting
50
37
(If the cable glands are in the way when mounted as above, the KINAX WT 710 should be rotated
over 120°, after loosening the 3 screws holding the gear).
67
83.1
The measuring instrument must have an extended indicator shaft at the back (1.5 mm diam., length
6...7 mm).
M4
Ø6.8
±0.2
80
95
44-H8
25
M4
±0.05
53
27