Publicité
Les langues disponibles
Les langues disponibles
RECIRCULATION
SCROLL WALL
6
NoN-ducted iNstallatioN oNlY:
Remove Recirculation Scroll Wall from inside the hood.
TABS
▼
7
NoN-ducted iNstallatioN oNlY:
Depress the tabs on the Recirculation Cover and
push cover out through top of hood to remove it.
RECIRCULATION
GRILLE
8
NoN-ducted iNstallatioN oNlY:
Remove recirculation grille from plastic bag and snap
it into the opening in the top of the hood.
All manuals and user guides at all-guides.com
▼
RECIRCULATION
COVER
models Ns130Bl • Ns130ss • Ns130WW
Ns136Bl • Ns136ss • Ns136WW
THUMB
RECIRCULATION
SCREW
9
NoN-ducted iNstallatioN oNlY:
Remove recirculation Plate and thumb screw from
plastic bag. Slide plate down onto recirculation grille
so that slots in plate fit into tabs on grille. Secure plate
with thumb screw.
3¼" x 10"
DAMPER /
DUCT
CONNECTOR
10 ducted iNstallatioN oNlY:
Remove vertical or horizontal duct knockout. Attach 3¼"
x 10" damper/duct connector (if using 3¼" x 10" duct)
or 7" oval duct Plate
over the knockout opening.
**
Note that the 7-in. round duct will need to be squeezed into an
oval shape to connect to the 7-in. oval duct plate on the hood.
Page
PLATE
SLOTS & TABS
RECIRCULATION
GRILLE
7" OVAL
DUCT PLATE
KNOCKOUT
OPENINGS
**
(if using 7-inch round duct)
**
Publicité
