Lenovo C1530 Mode D'emploi page 2

Safety and Maintenance Instructions
Security Warning
•
•
•
•
•
•
Maintenance Tips
•
The machine when working should have good ventilation, with its back being more than ten
centimeters from any barricade. Don't place any object on it when it is working.
•
When doing cleaning, please remember to take off the USB power plug. It will do to wipe it
with cloth. Don't use any cleansing fluid or spray.
•
In the event of malfunction, significant change in performance or damage to any component,
please first disconnect the power by taking off the USB power plug and then contact the
designated repair service center appointed by Lenovo (Beijing) Limited or contact the dealer.
You must not attempt to open the enclosure of the machine and repair it yourself.
20110524_LX-8451_C1530_manual.indb
All manuals and user guides at all-guides.com
If the machine gives out smoke or shows any other abnormal signs, please unplug the
USB device immediately to avoid accidents. Meanwhile, please contact the local dealer
or call Lenovo Group's Service Center for repair.
If the interior of the machine is exposed to the rain or is damped, please place it at a
ventilative place for drying. You must not plug it into the USB power source or dry it by
heat; otherwise the machine or its components may be burned or fail.
If any foreign object falls into the machine, please disconnect the USB power source
and overturn or shake the machine for several times. If the foreign object remains
inside, please contact the local dealer for repair.
The power lines and audio signal lines may not be subjected to squeezing, stretching,
hanging weight or stamping to prevent their insulation layer being damaged and the
ensuing shortcut or poor contact.
Intrusion of any foreign object or liquid into the machine shall be prevented. You must
not place chemicals (including cosmetics, liquid medicine, and pesticide etc.) on the
machine because they may be affected by the heat produced by the machine when it is
working. Please place the machine far away from inflammable or explosive hazardous
articles to avoid accidents. You must not block the heat dissipation holes because
insufficient heat dissipation may shorten the service life of the machine.
If the machine is not in use for a long time, please take off the USB power plug to
prevent lightning damage to the machine.
Working Environment
Cleaning
Repair
1
1
2011-6-13 15:43:49