Publicité
Les langues disponibles
Les langues disponibles
Operation
1. For switching on the metal
cutting saw, first press the
safety lock (2) inwards and
then press the ON/OFF
switch (3).
2. To switch off the machine,
release the ON/OFF switch.
Make sure the cut-off disc has reached full speed before cutting the
workpiece.
Do not apply too much force on the cut-off disc when cutting the work-
piece. Never stop the disc by hand.
Never adjust the mitre angle or undertake maintenance work on the
machine while the motor is running.
When locking the machine with the lock down bolt you can easily and
effortlessly carry the machine by holding the handle (1).
Operation
21
Publicité
