Publicité
Les langues disponibles
Les langues disponibles
5.5 Handling flour and similar products
To minimize the dust emission of flour and similar products, it is recommended to:
Carefully handle the packaged products while minimizing the height above the base of the bowl
from which they are poured;
Carefully open the packages in the lower part of the bowl in order to pour down the flour
without creating a cloud of dust;
Use the PPE (masks) for the respiratory tract protection.
6. Cleaning and servicing
6.1 Safety instructions
Disconnect the appliance from the mains electricity supply (pull out the plug
from the socket) before cleaning the appliance or starting any servicing or repair
activities, and, if it has been used in the last 15-20 minutes, wait until the motor
cools down completely;
Do not use aggressive detergent products and take care to ensure that water does not enter
the control panel or inside the appliance;
To prevent electric shocks, never immerse the appliance, the power supply cable or the plug in
water or any other liquid;
Use the PPE (masks) for the respiratory tract protection.
WARNING!
The appliance was not designed to be cleaned:
Using a water jet;
Using a high-pressure water jet;
By plunging it in water or another liquid.
6.2 Cleaning the appliance, bowl and work tools
The appliance must be regularly cleaned:
After every use clean the bowl, the tools (whisk, hook and spatula) and the bowl protection grill;
The hook, spatula, whisk and bowl may be cleaned (once they have been removed) under warm
running water and with neutral and non-aggressive detergents;
If necessary or in the case of particularly stubborn dirt, it's possible to use a plastic spatula. Do
not use metal tools to clean the tools, bowl or the appliance;
Clean all parts of the appliance with a neutral and delicate detergent using a soft, slighting
damp cloth or sponge. Carefully dry everything after cleaning;
Only use clean water to dampen the cloth or sponge for cleaning;
Do no use abrasive detergents, such as, for example, abrasive powders, agents containing al-
cohol, bleach, diluents, etc., which could damage plastic parts, painted parts or components,
made of stainless steel;
After cleaning, use a soft, dry cloth for drying the surfaces. Check all the parts are perfectly dry
before restarting the appliance;
Regularly check that the air vents on the rear of the appliance (ref. Pic.1 - Section 8), are clean
and not obstructed. Clean the air vents with a soft bush and a vacuum cleaner. Do not use
compressed air to avoid the formation of dust clouds;
TRANSLATION OF THE ITALIAN ORIGINAL INSTRUCTIONS
- 31 -
Publicité
