Amitek AP5 Manuel D'installation, Utilisation Et Entretien page 28

ATTENTION! Do not remove the appliance's plug by pulling the power supply cable.
ATTENTION! The power supply cable must never be placed in contact with hot objects.
ATTENTION! Do not spray water on the appliance and do not expose it to rain, water
or any other source of humidity. The appliance can cause injuries if it is not installed
correctly.
ATTENTION! Before installing the appliance compare the parameters of the local electric-
ity mains supply with the technical data of the appliance (see the nameplate fitted on the
rear of the appliance, Pic.2 - Section 8). Only connect the appliance to the mains if the
above-mentioned data correspond! All the safety instructions must be complied with!
ATTENTION!

Ensure that the power supply cable does not come into contact with heat sources or sharp
edges and that it does not become blocked under the appliance. Ensure that the cable is laid
out properly, and not rolled up or bent;

The power supply cable must not be laid on carpets, tablecloths, mats or on other heat insu-
lating materials, nor covered or immersed in water or other liquids and it must be positioned
where it cannot be walked on;

Position the appliance so that the plug is always accessible;

Do not use adapters or extensions;

Take care that the power supply cable does not cause tripping hazards.
5.2 Handling and positioning
The appliance must be positioned on a stable work surface and at a height such as to avoid incor-
rect posture; the appliance is not suitable for being used whilst resting directly on the ground.
Ensure that, from the point of view of the dimensions (see Tab.1 - Section 9), the space provided for
the appliance allows its correct use and easy servicing as indicated in section 6.
ATTENTION!

Remove the appliance from the packaging, taking care to follow the instructions in section 4
(Environmental notes) with regard to the storage and disposal of the packaging materials;

Move the appliance taking care of doing it with the appliance's head is always lowered and
correctly locked, do not turn it upside-down and always position it on a stable and correctly
levelled surface;

Never place the appliance on an inflammable surface (e.g. tablecloths, etc.);

Do not position the appliance close to naked flames, electric cookers, ovens or other sources
of heat, such as, for example, places exposed to the sun's direct rays. The heat can damage the
surface of the appliance and adversely affect its operation;
- 28 -
TRANSLATION OF THE ITALIAN ORIGINAL INSTRUCTIONS