Dolmar AT-3735 C Manuel D'instructions page 8

...................... Danger; be aware of thrown objects.
...................... The distance between the tool and
bystanders must be at least 15 m.
............... Keep bystanders away.
.............. Keep distance at least 15 m.
15m(50 )
FT
...................... Wear a helmet, goggles and ear
protection.
...................... Wear protective gloves.
...................... Wear sturdy boots with nonslip soles.
Steeltoed safety boots are
recommended.
...................... Do not expose to moisture.
...................... Top permissible tool speed.
........... Never use metal blade.
Cd
............... Only for EU countries
Ni-MH
Li-ion
Do not dispose of electric equipment
or battery pack together with
household waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries
and Accumulators and Waste
Batteries and Accumulators and their
implementation in accordance with
national laws, electric equipment and
batteries and battery pack(s) that
have reached the end of their life
must be collected separately and
returned to an environmentally
compatible recycling facility.
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Grass Trimmer
Model No./Type: AT-3735 C
Specifications: see "SPECIFICATIONS" table.
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60335, EN/ISO11806, EN50636
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
The conformity assessment procedure required by
Directive 2000/14/EC was in Accordance with annex V.
With plastic blade
Measured sound power level 92 dB (A)
Guaranteed sound power level 92 dB (A)
8
The conformity assessment procedure required by
Directive 2000/14/EC was in Accordance with annex VI.
Notified Body:
TÜV Rheinland LGA Products GmbH
Tillystraße 2
90431 Nürnberg, Germany
Identification number 0197
With nylon cutting head
Measured sound power level 89 dB (A)
Guaranteed sound power level 90 dB (A)
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
IMPORTANT SAFETY
INSTRUCTIONS
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for
future reference.
1. Be familiar with the controls and proper use of the
equipment.
2. Cutting elements continue to rotate after the motor
is switched off.
3. Never allow children or people unfamiliar with the
instructions to use the machine.
4. Stop using the machine while people, especially
children, or pets are nearby.
5. Only use the machine in daylight or good artificial
light.
6. Before using the machine and after any impact,
check for signs of wear or damage and repair as
necessary.
7. Take care against injury from any device fitted for
ENH040-4
trimming the filament line length. After extending
new cutter line always return the machine to its
normal operating position before switching on.
8. Never fit metal cutting elements.
9. This appliance is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have been
given supervision or instruction concerning use
of the appliance by a person responsible for their
safety. Children should be supervised to ensure
that they do not play with the appliance.
10. Use the tool with the utmost care and attention.
11. Operate the tool only if you are in good physical
condition. Perform all work calmly and carefully.
Use common sense and keep in mind that the
operator or user is responsible for accidents or
hazards occurring to other people or their
property.
1. 10. 2015
Yasushi Fukaya
Director
GEB109-3